- Home
- Company
- Services
- Products
- Download
- Careers
- Contact
Supplies A Full Range Of SS Machined Washer, SS 202 Machined Washer At Factory Price In India. Carries A Complete Line Of SS 304 Machined Washer, SS 316 Machined Washer In Mumbai, India
Machinability is the term used to denote or indicate the machining performance of a material like stainless steel by a cutting tool. Since different grades of stainless steel have differences in both their physical and mechanical properties in comparison to the other steel grades like - carbon steels, different techniques are required when these stainless steel grades are to be machined.
In an annealed condition, the relative machinability of austenitic grades ss machined washer is around 50 as compared to carbon steels, whose relative machinability is 100. This difference is observed due to the nature of stainless steels being tough rather than hard. Which is why stainless steel has a tendency to seize and gall.
Three of the most commonly machined stainless steel grades are 202, 304 & 316. All the three grades, i.e. – 202, 316 & 304 are austenitic grades of stainless steel. The difference between these stainless steel grades is due to the change in composition. For instance, the 202 grade stainless steel machine washers primarily contains chromium, manganese & nickel as their alloying materials. While the both the grades 304 & 316 tend to have both chromium as well as nickel predominantly in their alloys.
During the machining of grade 202 stainless steel, long, gummy chips are produced. Machining of stainless steel grade 202 can also be performed in the annealed condition. The heat treatment is done to the material by soaking it at 1038°C for 30 min, followed by cooling below 16°C for full martensite transformation. Although the material can be welded by using common fusion and resistance methods, this steel grade should not be joined using oxyacetylene welding technique. The recommended filler metal for this alloy is AWS E/ER630. Forging of the ss 202 machined washer can be done by pre-soaking for the alloy for 1 hour at 1177°C. Forging the alloy below a temperature of 1010°C is not advisable.
Alloy 304 or 304H or 304L are subject to work hardening during deformation. This ss 304 machined washer is subjected to chip breaking during machining. The best machining results are observed when the a combination of slower speeds, excellent lubrication, heavier feeds, sharp tooling and powerful rigid equipment are used to machine this grade.Besides being a very popular alloy, the 316 has a machining cost factor of 5.6 when compared to carbon steel grade12L14. ss 316 machined washer is recommended for welding as grade 316 can be readily cold worked.
| Stainless Steel U Bolts Size | Cold Froging : M2-M24 Hot forging M24-M100, 1-1/2” Dia, up to 1100mm lg Machining and CNC for Customized connecting element: up to M100 / 4” Dia, up to 1500mm lg Stainless Steel U Bolts M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes |
|---|---|
| Grade | 18-8 Stainless Steel, 4.8, 8.8, A2, A4, A2-70; A4-70; A4-80 U Bolts |
| British standards | BS6105 (old: BSENISO 3506) which covers Part 1 bolts, screw and Us, part 2 nuts and part 4 tapping screws. |
| DIN Standard | B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985 |
| ISO – International Organization for Standardization | ISO 4032, ISO 4033, ISO 4017, ISO7380 JIS standards |
| Length | 3 mm to 200 mm |
| Stainless Steel Bolts, Us Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard: | BS 4882 DIN 975 DIN 976 NFE 25136 ANSI B16.5 DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards ANSI – American National Standards Institute ANSI B 18.2.4 2M ANSI B 28.2.4 1M U Bolt length are defined in ASME B16.5 standard Hex nuts are defined in ASME B18.2.2 ASME B18.5 GB/T5782, GB/T5783, GB5783 |
| UTS – Unified Thread Standard | UNC, UNF, UNEF, UNS, NPT, NPTF |
| Dimensions | ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded. |
| Tolerance | +/-0.01mm to +/-0.05mm |
| Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| Finishing: | Zinc (yellow, white, blue, black), black oxide,Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET |
| Finish | Per ASTM A380/A380M |
| Production process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing |
| Origin and service-region: | European Origin of Stainless Steel U Bolts are Western European. However projects with eastern origin are possible on request. |
| Stainless Steel bolting materials Surface Coating: | Hot Dipped Galvanizing U Bolts Phosphate U Bolts Teflon U Bolts Ptfe Coated U Bolts Xylon U Bolts Zinc Phosphate U Bolts Manganese Phosphate Zinc Electro Plating (Hexavalent or Trivalent Chrome) ZAC (Zinc Alluminium Flake Coating) Cadmium Shoulder Bolts All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE. |
| Surface treatment | Passivation Polish Anodizing Sand blasting Black oxide coating Heat-disposing Rust preventive oil Hot dip galvanized Shoulder Bolts Electroplating (color, blue, white, black zinc, Ni, Cr, tin, copper, silver) |
| Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc. |
| Stainless Steel U Bolts Packing: | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Why choose us? | Best Price in India and compare to China Professional technical team High precision threads Strong production line Manifold Pipe Solution Inc. will be your reliable partner |
| MOQ | 5 pieces |
| Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1, Tensile testing to ISO 898-1 Nut proof load testing to ISO 898-2 Suitability for preloading to EN 14399-2 Suitability test for calibrated preload to EN 14399-10 Charpy Impact testing in accordance with ISO 148-1 Hardness testing to ISO 6508-1 Tri-Roll Thread Comparators Calibrated gauges and tools |
| Free Samples | Yes |
| Delivery time | Regular product is about 7-15 days, custom product will according to special requirement |
| Payment Terms | Paypal, T/T,Western Union, L/C or Trade Assurance 30% deposit & balance before shipping |
| Other available material | Stainless Steel U Bolts: SUS201, SUS304, SUS316, SUS410 Brass U Bolts: C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), (C27200CuZn37), C28000(CuZn40) Bronze U Bolts: C51000, C52100, C54400 etc Aluminum U Bolts: Al6061, Al6063 etc Aluminum Alloy U Bolts: Al6061, Al6063 etc Titanium and Titanium Alloy U Bolts: TAD, TA1-TA8, TB2, TC1-TC10 Alloy steel U Bolts: SCM435, C10B21, C10B33 |
| Stainless Steel U Bolts dealers & distributors are located in | Mumbai, Coimbatore, Kong, Tehran, Rio Bangkok, Muscat, Surat, Bogota, Dhabi, Ranchi, Montreal, Howrah, Santiago, Jamshedpur, Port-of-Spain, City, Vung Granada, Ernakulam, Istanbul, Hong Hanoi, Vadodara, Manama, Mexico Rajkot, Nagpur, Gimhae-si, Delhi, Indore, Ankara, Hyderabad, Caracas, Ahvaz, Kanpur, Abu Karachi, Perth, Al de Riyadh, Ludhiana, Lagos, Kolkata, Tau, London, Courbevoie, Dammam, Bengaluru, City, Kuwait Pimpri-Chinchwad, New Gurgaon, Melbourne, Thiruvananthapuram, Sydney, Noida, Baroda, Khobar, Calgary, Janeiro, Ahmedabad, Gujarat, Chennai, Ludhiana, Bangalore, India |
| Uses & application | Wind tower, Nuclear power, Railway, Automotive industry, Construction, Electronic industry |
India’s Largest Manufacturer Of SS 316 U Bolts, SS U Bolts, 304 SS U-Bolts In Mumbai, India
| Machined Washers Standard | DIN, ASTM, BS and all International Standards |
|---|---|
| Machined Washers Length | M02 to M33 |
| Size of Machined Washers | 3 mm to 200 mm |
| Type Machined Washers | Machine Washer |
India’s Largest Manufacturer Of Custom Cnc Machined Washers, Machined Flat Washer, Precision Machined Washers In Mumbai, India
| FOR BOLT OR SCREW SIZE | I.D. | O.D. | THICKNESS |
|---|---|---|---|
| M 1.6 | 1.7 | 4 | 0.3 |
| M 1.8 | 2 | 5 | 0.3 |
| M 2 | 2.2 | 5 | 0.3 |
| M 2.2 | 2.4 | 6 | 0.5 |
| M 2.5 | 2.7 | 6.5 | 0.5 |
| M 3 | 3.2 | 7 | 0.5 |
| M 3.5 | 3.7 | 8 | 0.8 |
| M 4 | 4.3 | 9 | 0.8 |
| M 4.5 | 4.8 | 10 | 1 |
| M 5 | 5.3 | 10 | 1 |
| M 6 | 6.4 | 12.5 | 1.6 |
| M 7 | 7.4 | 14 | 1.6 |
| M 8 | 8.4 | 17 | 1.6 |
| M 10 | 10.5 | 21 | 2 |
| M 12 | 13 | 24 | 2.5 |
| M 14 | 15 | 28 | 2.5 |
| M 16 | 17 | 30 | 3 |
| M 18 | 19 | 34 | 3 |
| M 20 | 21 | 37 | 3 |
| M 22 | 23 | 39 | 3 |
| M 24 | 25 | 44 | 4 |
| M 27 | 28 | 50 | 4 |
| M 30 | 31 | 56 | 4 |
| M 33 | 34 | 60 | 5 |
| M 36 | 37 | 66 | 5 |
| M 39 | 40 | 72 | 6 |
| M 42 | 43 | 78 | 7 |
| M 45 | 46 | 85 | 7 |
| M 48 | 50 | 92 | 8 |
| M 52 | 54 | 98 | 8 |
| M 56 | 58 | 105 | 9 |
| M 60 | 62 | 110 | 9 |
| M 64 | 66 | 115 | 9 |
| M 68 | 70 | 120 | 10 |
| M 72 | 74 | 125 | 10 |
| For Screw Nominal Size | Hole Diameter | Outside Diameter | Washer Thickness |
|---|---|---|---|
| M1.6 | 1.7 | 4 | 0.3 |
| M2 | 2.2 | 5 | 0.3 |
| M2.5 | 2.7 | 6 | 0.5 |
| M2.6 | 2.8 | 7 | 0.5 |
| M3 | 3.2 | 7 | 0.5 |
| M3.5 | 3.7 | 8 | 0.5 |
| M4 | 4.3 | 9 | 0.8 |
| M5 | 5.3 | 10 | 1 |
| M6 | 6.4 | 12 | 1.6 |
| M7 | 7.4 | 14 | 1.6 |
| M8 | 8.4 | 16 | 1.6 |
| M10 | 10.5 | 20 | 2 |
| M12 | 13 | 24 | 2.5 |
| M14 | 15 | 28 | 2.5 |
| M16 | 17 | 30 | 3 |
| M18 | 19 | 34 | 3 |
| M20 | 21 | 37 | 3 |
| M22 | 23 | 39 | 3 |
| M24 | 25 | 44 | 4 |
| M27 | 28 | 50 | 4 |
| M30 | 31 | 56 | 4 |
| M33 | 34 | 60 | 5 |
| M36 | 37 | 66 | 5 |
| M39 | 40 | 72 | 6 |
| M42 | 43 | 78 | 7 |
| M45 | 46 | 85 | 7 |
| M48 | 50 | 92 | 8 |
| M52 | 54 | 98 | 8 |
| M56 | 58 | 105 | 9 |
Buy Machined Cup Washers, CNC Machined Shoulder Washer At Factory Price In India